u-boot-rpi2

Cross-build das u-boot for model rpi2

U-Boot loader for Raspberry Pi 2 To install this bootloader, copy u-boot.bin in the share/u-boot/u-boot-rpi directory to the first partition, formatted as FAT16 or FAT32, on an SD card. You will also need the firmware files from the rpi-firmware package. This version is patched so that: * ELF and API features are enabled. * The distroboot command knows how to load FreeBSD loader(8) * By default, it loads ubldr.bin (PIE) from file ubldr.bin on the FAT partition to address ${kernel_addr_r}, and launches it. If ubldr.bin is not found, it falls back on ubldr For information about running FreeBSD on RaspberryPi, see For general information about U-Boot see WWW: https://www.denx.de/wiki/U-Boot